Posted 18 February 2014 - 09:34 PM
Also, when the magazine is in, it is very difficult to rack the bolt.
Posted 19 February 2014 - 04:17 AM
Does it not fire at all when a loaded mag is used? Do you feel the trigger click when it doesn't fire?
And when it fires without bb's are you holding down the bolt release or it fires with an empty mag without doing so?
What brand bb's are you using and what gas (green or propane)?
There may be multiple issues with the KMP9 and you may need to send it in but let's start here.
And welcome to the forums.
Posted 19 February 2014 - 06:49 PM
I was not holding down the bolt release. Just pulling the trigger. Tried it again and it doesn't seem to be working, shoots once and I have to rack the bolt again.
BB's, Angel Custom .20. And using green gas.
Posted 19 February 2014 - 06:55 PM
Posted 19 February 2014 - 07:28 PM
Posted 19 February 2014 - 08:44 PM
Tried your suggestion, did not work.
Posted 19 February 2014 - 09:18 PM
Posted 20 February 2014 - 03:44 AM
I say this because my KMP9 only likes certain bb's with a very high polish. I would get a first few shots then because the bb's were not feeding properly my gun would dry fire or get jammed in the feeding ramp of the gun.
Posted 22 February 2014 - 08:08 AM
Posted 24 February 2014 - 12:23 PM
Posted 01 June 2014 - 11:36 AM
Posted 29 September 2014 - 07:26 PM
Posted 30 September 2014 - 05:42 PM
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users