Brand new m11a1 ns2 problems
Posted 14 December 2012 - 06:20 PM
Posted 16 December 2012 - 07:36 AM
i lubed it everywhere properly and all 3 mag dont finish. Anyone?
Posted 16 December 2012 - 02:43 PM
Posted 16 December 2012 - 03:27 PM
Posted 16 December 2012 - 03:49 PM
Posted 17 December 2012 - 12:11 PM
Posted 21 December 2012 - 06:06 AM
I am new to Airsoft and by no means an expert. I am just learning to work on my Mac and your problems sound a lot like some that I was having.
Complete gas dumps with no shot, weak shots that didn't even clear the hop up bucking.
Long story short I found that my seals were dry. #125 Jet Nozzle / Plunger and the Main Seal #130.
I lubed these up and everything was right with the world.
I use propane and these seals seem to dry out kind of fast.
instead of opening the gun up just to do a quick lube on the seals I just shoot a quick blast of spray silicone down the nozzle and so far that has worked everytime.
I also use a special magazine saver gasket oil on all my seals and magazines that seems to be pretty good stuff.
I just got a new WE M16A1 that the magazine leaked so bad out of the box you could hear it hiss. 2 drops of magazine oil and it holds a good solid 2 magazine plus charge now.
I have NEVER got the 2 and 1/2 magazines from one fill (even shooting all semi auto) that I always heard of before I got my gun.
When I fill my magazines I hold the can against my ear and I can hear when the magazine is full. I takes longer than 20 seconds though I have never timed it.
Even on a 70 degree or hotter day it is hard to get a full clean solid magazine dump in one burst.
As I said I am new at all this but this is what has worked for me in a simular situation.
I'll be interested to see if this helps.
Love my Mac, wouldn't trade it for the world.
Edited by Keith, 21 December 2012 - 06:10 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users