Kwa M93R Trigger Problem
Posted 07 August 2011 - 04:37 PM
Posted 11 August 2011 - 05:53 PM
Posted 14 August 2011 - 09:49 AM
Posted 28 August 2011 - 08:07 PM
I have a similar issue with my M93R. When I fire the pistol it works for the first 2-3 trigger pulls. After that the hammer will stay in the full cocked position. The difference here is that I can't push the hammer forward.
I believe that this problem may be associated with the safety. When I removed the slide from the pistol, I observed that there is small part sticking out right above the Safety mechanism. In the full cocked position, I pressed down on that part and the hammer was released. I'll post a picture later to show what i'm referring to.
Posted 05 March 2013 - 01:53 AM
Posted 05 March 2013 - 04:44 PM
I found out the problem, if you push down on the top of the slide does it fire? if so then # 11 is worn down, you can buy this part in the pro shop but since I dont have any idea how to take this gun apart properly and there aren't any videos on it id say to just send it into kwa, but you can tell them you think its part # 11 that broken. heres a link showing where part 11 is, http://kwausa.com/im..._g15_m93rii.jpg
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users