Mark Iv 1911's Saftey Doesn't Work....
Posted 06 April 2011 - 03:45 PM
I just bought a Mark IV and the safety doesnt work. its weird because i also have the Mark II and the safety works perfectly on it. when i click it up, i pull the trigger and its tight and wont move. On the Mark IV, when i put the safety on, i pull the trigger and it just takes a little more effort to pull the trigger, then *click*, the hammer goes down. then i can pull down the hammer even though the safety is on, and keep firing. Normally i wouldn't care because i rarely use the safety anyway, but the thing is, if i turn the safety on by accident and i pull the trigger in an actual game, it will shoot but the slide wont cycle. kind of a bummer. If you know whats goin on, please tell me.
Thanks in advance!
Posted 07 April 2011 - 08:54 AM
I've tried it all, pulling back the hammer then putting the safety on, keeping the hammer forward and putting the safety on and then pulling back the hammer while the safety is on (which shouldn't be able to happen). the only time the trigger will not move is if the hammer is half cocked.
Posted 07 April 2011 - 11:24 AM
Posted 10 April 2011 - 03:31 PM
It goes all the way up.
Posted 11 April 2011 - 01:04 PM
Posted 12 April 2011 - 02:49 PM
Well actually, when I bought the gun, it was like that. I even tried switching the safety out from my Mark II. that didnt work either. Then i tried switching the entirety of the internals. not even that worked. Its a frame issue. Something on the frame is damaged. its just a bummer since i cant get the warranty because the Airsoft store i bought it from had it longer than 40 days.
Posted 26 April 2011 - 05:42 AM
Posted 11 November 2011 - 09:42 PM
Posted 12 November 2011 - 12:08 AM
Posted 12 November 2011 - 07:59 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users