airsoftamateur32, on 07 March 2013 - 06:53 PM, said:
first, clean your stock barrel /bucking and hop up,i tend to soke my bucking in warm water mixed with a dash a dish detergent,as for my inner barrel i use gun swabs that i bought and just cut in half.Another thing that you should do, is check your compression by takeing the complete pistion assembly, and cylinder assembly with the air nozzle and put you finger on the attached nozzle,then try and push the piston down the cylinder. If it can go all the way down take the o ring on the pistion and stretch it a lil and put a dash of pure silicon oil on it then repeat process.if it still goes all the way in buy a new # 14 danco o ring. as for barrels i dont suggest prommys because of the window size on the barrel,an option that would work better is the edgi 6.01.To address your spring issue i would get a guarder sp110 spring if your looking for 400 fps.and yes the lipo battery in those specs would work wonders.
I have a local shop here that carries all that stuff for besides the edgi barrel. They charge $30 for instalation and the spring, and they told me the exact same spring lol, so I went with that and will pick up a barrel later. I also picked up the lipo. The cleaning info is wonderful, I was very confused before what you said. When I it back I'll clean the internals like you said. Thanks for the info!