Madbull Barrel In 2Gx Hop Up?
Posted 29 May 2012 - 06:34 PM
Will a Madbull 6.03mm barrel feed and function properly with a KWA 2Gx hop up unit AND bucking?
Posted 29 May 2012 - 06:53 PM
Others not so much. You are not going to get a conclusive answer by KWA owners as a whole.
All I can tell you is my experience.
I currently use a MadBull 509mm/6.03mmtbb in both my KWA m16's.
I currently use a MadBull455mm.6.03tbb in my KWA 2gxm4
I also used a MadBull 363mm/6.03tbb in my KWA gen1 m4.
That is four MadBull inner barrels in three different lengths.
All the performance results were fantastic and MadBull inner barrels are my inner barrel of choice in my KWA guns.
For you specific situation, why do want to use a length of 300mm in a SR10?
It's stock inner barrel is 425mm. Do you really want to go that much shorter?
That is considerably shorter?
The performance of the gun is the result of the skill of the tech that performs the work.
Inner barrel changes are not difficult to do, but none the less require some precision in doing it.
Edited by vanevery, 29 May 2012 - 06:54 PM.
Posted 29 May 2012 - 07:06 PM
As far as the install goes, I am fairly tech savvy; inner barrels/hop ups have never been an issue, I have just read a bunch of contradicting statements about the compatibility of aftermarket parts.
What bucking are you using with your Madbull barrels?
Posted 29 May 2012 - 11:13 PM
Posted 29 May 2012 - 11:18 PM
Posted 29 May 2012 - 11:27 PM
Posted 30 May 2012 - 03:35 AM
Any mods done would be needed due to whatever bucking you are using, stock 2g or not.
No mod's would be reqired for the fact that you would be using a MadBull brand inner barrel.
For the OP, a 300mm inner barrel and 2g bucking really would not require any mods.
I usually do a teflon tape mod on all my buckings for I do think it saves a tiny bit of air leak and gives the inner barrel a bit more stability.Then again, I way over do it on the teflon tape and that is why it adds inner barrel stability.
If you are using a MadBull brand inner barrel, stock inner barrel, or any after market inner barrel, and your gearbox has an m130 spring or above and you are using the stock 2g bucking, I would suggest a Nub Mod or a FireFly Buffer Rubber. This is just my opinion, not everyone agrees with this.
Edited by vanevery, 30 May 2012 - 03:37 AM.
Posted 30 May 2012 - 08:16 AM
I own a RIS and i put a KM Head 6.02 ( from the proshop ) and my brother has a SR10 with a stock barrel and get just as much range/accuracy as myself.
Just from what i've read the SR series already come with a inner barrel of 6.03 quality or better.
Thats one of the reasons the pro shop has stopped carrying the TBB's in the sr series lengths.
Posted 30 May 2012 - 04:35 PM
However, I have yet to test its range, and will do so when i get the chance.
I am changing the inner so that it does not exceed my outer barrel length. If it wasn't stated above, my apologies, but I had swapped the outer barrel for a Madbull 10.3" one.
Posted 31 May 2012 - 05:05 AM
I apologize musta missed that part.
Posted 11 November 2013 - 05:34 PM
Posted 12 November 2013 - 03:32 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users