Posted 09 May 2012 - 06:44 PM
I just bought the M93r Ns2 because I loved the style and all the functions of it also! So clearly I was very disappointed to find out that there is a common problem going on with the M93r. As far as I understand it the gun will eventually stop working on semi-auto and either only fire full or burst, or even worse only fires full auto on all functions.
Because I am not going to shell out about $60 to get this gun fixed when or if it breaks(Even though from what i hear this is expected with this gun) considering I just spent over $200 on this gun and a spare mag.( that's a years worth of savings for me). So now to the question; How can I prevent this gun from breaking? Or if it does break is there an easy way to fix it?
I will be so disappointed in this gun and KWA if this gun breaks. I mean come on this is KWA, I shouldn't be spending my time worrying about how to prevent a common breakage I should be shooting. And also $200 is a lot for an airsoft gun and my parents went out on a limb and trusted me on this one, if it breaks i doubt that will happen again.
Posted 10 May 2012 - 01:00 PM
Posted 10 May 2012 - 02:02 PM
We have seen several M93Rs have an issue shooting on the wrong setting however this issue does not affect most of the products sold. We do our best to make sure every gun we sell is working properly and consistently which is why we regularly evaluate each model to see how we can improve and avoid any problems in the future.
Your gun has yet to have a problem so I would not worry about it breaking. As I said before most of the guns sold do not have a problem. If something does happen don't hesitate to contact on our Help Desk.
Posted 10 May 2012 - 04:29 PM
1. CLEAN YOUR GUN most people who have problems with their guns don't clean them, check out the vids on gbb maintenance on this website
2. LUBE YOUR GUN a well oiled gun will last longer, don't use spray silicon oil or get any oil inside your inner barrel, i ruined my first ATP hop up bucking by putting oil in the barrel. Also dont go overkill with the lube, the video will cover this
3. USE GREEN GAS you put the money down for a good gun don't cheap out on the gas, you wouldn't put diesel in a ferrari would you.
propane just causes problems.
You don't have to lube your gun every day or clean it every day. i usually clean and lube all my guns after a day at the field and their fine.
I think you will really like your m93r, there's a few at my field it sucks being shot three times in a row
Edited by ransackedsnake7, 10 May 2012 - 04:30 PM.
Posted 10 May 2012 - 06:18 PM
Posted 28 June 2012 - 04:55 AM
Besides ransackedsnake7's COMMON tips, are there any other SPECIAL tips to prevent the issue?
Darrelleman, how about your M93r now?
Posted 28 June 2012 - 05:18 AM
Clean and Lube after any extended usage.
I had mine for a year or so and it still is working great (I hope) in the hands of it's new owner. I never had issues with the selector.
The problem you're more likely to encounter is the nozzle breaking (part 6 if my memory's correct)
To prevent, clean and lube! But it will most probably happen at sone point. I consider that part a "consumable", so you might want to buy an extra nozzle now, and maybe a set springs just in case.
Also, don't abuse the full auto. For one, the real gun is not full auto. And it does put a lot more stress on the internals. So use with moderation. 3Burst shouldn't be as prohibitive. In all case, single shot is more precise and the gun cycles so fast that you can still have a good rate of fire and more precision using single shot.
As for propane, using it will void warranty. So at least don't use it until your warranty has ended. I personally used propane exclusively without any issues, but I wouldn't recommend it unless you understand all the implications an risks. You might not have the same results and damage your gun. So it really is up to your discretion.
Enjoy! It's a great gun to shoot! I know i will miss mine
Posted 28 June 2012 - 08:38 AM
Does it mean that full auto function will cause this issue easily? Or say, useing it in semi or 3burst mode will prevent the issue effectively?
Posted 28 June 2012 - 09:28 AM
If there were illustration guidance to demostrate how to fix this typical issue, it would be very helpful to all KWA M93R fans!
Edited by Billy1788, 29 June 2012 - 07:04 AM.
Posted 28 June 2012 - 01:47 PM
Posted 29 June 2012 - 04:35 AM
Unless, if like me you let yours fall from you holster in the sand and there's sand everywhere inside the gun, incliding the grips. Then yes
I mean, it's all about common sense guys, there's no voodoo or sorcery involved
Posted 04 July 2012 - 12:18 AM
Posted 04 July 2012 - 04:50 AM
Posted 20 July 2012 - 02:48 PM
Posted 23 July 2012 - 11:23 AM
Posted 23 July 2012 - 11:37 AM
darrelleman, Found your hop up post and replied there.........
Posted 04 September 2012 - 01:03 AM
Posted 01 November 2012 - 11:15 AM
Im super pissed, this gun is my baby and I just ordered a 48 rd mag... guess I gotta open the guts up and fix it myself cuz this is going to keep happening.
Also tagged with one or more of these keywords: M93r, Ns2, Semi-auto problem, Prevention, Fix, How to, Help
AEG Technical Forums →
KM4/KM16/CQR Series →
AEG Technical Forums →
Downgrades & Modifications →
Pro Shop →
GBB Pistols Technical Forums →
M9 Series →
AEG Technical Forums →
H&K G36c (KG36C) →
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users