Expected Range From G36C With Small Upgrade.
Posted 28 January 2012 - 01:53 PM
Posted 28 January 2012 - 03:03 PM
Also make sure that you still have a nub and contacts in the bucking comes down when hop up is engaged. Sometimes you can lose the nub when changing inner barrel and don't even know it.
Posted 28 January 2012 - 05:36 PM
Posted 28 January 2012 - 06:07 PM
Noting the underlined and bolded parts above, your bucking may have been contaminated with whatever is in the barrel. If you silicon oil to clean your barrel, then you got the oil on the bucking making it less effective. You will need to decontaminate your bucking by wiping the oil off it with a Q-tip. If that doesn't work you may have to remove the bucking and wash it in warm soapy water and dry thoroughly.
If the hop up was engaged you may have damaged the bucking when you put the cleaning rod and cloth down through the bucking. You may need a new bucking. Also check what Niko suggested.
You might want to also check to see it the barrel was installed correctly since that affects the hop up and compression. What FPS is the gun shooting at?
I don't think the mosfet has anything to do with it
Posted 28 January 2012 - 06:15 PM
Posted 28 January 2012 - 10:54 PM
thanks for the advice tho. much appreciated
Posted 28 January 2012 - 10:55 PM
Posted 29 January 2012 - 01:44 PM
Posted 29 January 2012 - 04:28 PM
Posted 29 January 2012 - 04:47 PM
Posted 29 January 2012 - 06:08 PM
Posted 29 January 2012 - 06:13 PM
Posted 29 January 2012 - 08:37 PM
Posted 30 January 2012 - 03:46 AM
Posted 30 January 2012 - 07:43 PM
Posted 31 January 2012 - 03:48 AM
Posted 31 January 2012 - 07:41 PM
Posted 13 March 2012 - 06:26 PM
Posted 13 March 2012 - 06:38 PM
BTW, so where is the MOSFET now?
Posted 14 March 2012 - 06:57 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users