Jump to content


EVOII hop up tensioner


  • Please log in to reply
280 replies to this topic

#181 w1lp33

w1lp33

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 19 April 2013 - 04:32 PM

Fellow canadian here, I've never had an issue ordering from Evike. Their shipping is slow (have to wait for a shipping quote email after placing order, etc) but always received everything I've purchased from there. Just my two cents.

Also, I've been very happy with the EVO II set in my LM4, makes it gameable, whereas before it was all but unusable on the field, the brass arm was so easily bent out of shape.

#182 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 20 April 2013 - 08:36 PM

SBR Length RAT barrel + EVO2 hopup unit got me about a 1' spread at about 180+. I think if I had gone prone or used a table I could have gotten tighter groupings. This was unfortunately with only .28g BBs as the field I played at only allows bio BBs and I didn't have anything heavier at the moment.

#183 netpoc

netpoc

    Enthusiast

  • Members
  • PipPip
  • 185 posts
  • Gender:Male
  • Location:Central Coast, CA
  • Country:

Posted 22 April 2013 - 11:43 AM

Looks like the Maple Leaf kit is in stock on ebairsoft.com

http://www.ebairsoft...tem-p-6917.html

#184 BeachEMT

BeachEMT

    Specialist

  • Members
  • PipPipPip
  • 543 posts
  • Gender:Male
  • Location:People's Republic of California
  • Interests:Engineering, Emergency Medicine
  • Country:

Posted 24 April 2013 - 11:08 PM

AEX now has just the Maple Leaf buckings in stock if anyone is interested:
http://www.airsoftex...qhuqgbbnhii7al4

#185 Maximusmjg

Maximusmjg

    Newbie

  • Members
  • Pip
  • 22 posts
  • Country:

Posted 25 April 2013 - 05:37 AM

My dumb a** broke the stainless steel tensioner for the EVOII hopup while trying to flatten it out a bit cause it had way to much hop (BBs winged up dramatically after approx. 50ft with hopup turned all the way down) I reinstalled the stock brass tensioner and the rifle shoots amazingly far approx. 170'-180' every trigger pull ( using.25 at 420fps) I would have to say its more about the bucking than the arm in my experience

#186 The Nutty Professor

The Nutty Professor

    Enthusiast

  • Members
  • PipPip
  • 99 posts
  • Gender:Male
  • Location:Savannah Georgia
  • Country:

Posted 25 April 2013 - 05:33 PM

I just had the chance to test this sucker out in a very wide open space with .30's and the hop turn all the way down. It's still over hopped. I'm going to have to go heavier to flatten it out. I tried .43's but they seemed a bit erratic. Am I upset?? Hell no I'm totally floored with the accuracy and range. It's over hopped but shoots straight as an arrow!!

#187 DoubleA

DoubleA

    Newbie

  • Members
  • Pip
  • 12 posts
  • Country:

Posted 29 April 2013 - 07:03 AM

So, If i order this Evo II pack from EB airsoft,

http://www.ebairsoft...tem-p-6917.html

can I install it in my stock lm4 without any mods and does it come with the bucking and the pieces I need to install it? I do have a stock barrel. From what I've been reading the best barrels to pair with the Evo seem to be the RAT ones. Where are they located?

Thanks so much.

#188 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 29 April 2013 - 08:25 AM

That kit will work, best choice for the RAT barrel is tiger tactical airsoft. They're located in the US and ship orders FAST.

#189 DoubleA

DoubleA

    Newbie

  • Members
  • Pip
  • 12 posts
  • Country:

Posted 29 April 2013 - 10:33 AM

Sweet. Thanks for the recommendation to tiger Akira. I didn't even know they had those parts. I'm assuming from what I've read above that the Ra Tech barrel and Evo II are both drop in? No modification required?

#190 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 29 April 2013 - 10:43 AM

Thats correct

#191 BeachEMT

BeachEMT

    Specialist

  • Members
  • PipPipPip
  • 543 posts
  • Gender:Male
  • Location:People's Republic of California
  • Interests:Engineering, Emergency Medicine
  • Country:

Posted 29 April 2013 - 11:50 PM

ASGI just got the maple leaf bucking in stock:
http://www.airsoftgi...oducts_id=13390

#192 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 30 April 2013 - 05:58 AM

The interesting thing is judging by pictures the bucking sold alone is not the same bucking as the one me, Boobie, and Dos_Santos have. The teeth look like bumps in pictures like the OEM setup while the model we're using has more of a gradual ramp like design.

#193 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,720 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 30 April 2013 - 11:38 AM

View Postakiraspeedstar, on 30 April 2013 - 05:58 AM, said:

The interesting thing is judging by pictures the bucking sold alone is not the same bucking as the one me, Boobie, and Dos_Santos have. The teeth look like bumps in pictures like the OEM setup while the model we're using has more of a gradual ramp like design.
Can you post a picture?  If you already have please link to it.  Thank you.

#194 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 30 April 2013 - 12:07 PM

Ill have to check my computer when I get home from work.

#195 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,720 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 30 April 2013 - 12:33 PM

Thx

#196 -wigs-

-wigs-

    Enthusiast

  • Members
  • PipPip
  • 131 posts
  • Country:

Posted 02 May 2013 - 06:23 PM

It's not the same, I bought the whole kit and gave the inner to my buddie to use in his Kriss. The stand alone ML bucking he bought has no gradual cant to the nubs like the one in the full kit. Looks more like stock or the guarder nubs

#197 Maximusmjg

Maximusmjg

    Newbie

  • Members
  • Pip
  • 22 posts
  • Country:

Posted 03 May 2013 - 12:28 PM

I didn't buy the Evo II kit with the inner barrel and all I grabbed the MAPLE KSC 2 DIAMOND HOP UP kit works and installs the same way.


http://youtu.be/Jw_v...e/Jw_v9Q7yMX8  


#198 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,720 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 03 May 2013 - 06:34 PM

View PostMaximusmjg, on 03 May 2013 - 12:28 PM, said:

I didn't buy the Evo II kit with the inner barrel and all I grabbed the MAPLE KSC 2 DIAMOND HOP UP kit works and installs the same way.





#199 Maximusmjg

Maximusmjg

    Newbie

  • Members
  • Pip
  • 22 posts
  • Country:

Posted 04 May 2013 - 02:46 AM



#200 amzavala88

amzavala88

    Newbie

  • Members
  • Pip
  • 3 posts
  • Country:

Posted 04 May 2013 - 10:53 AM

@Maximusmjg.... You said you're using an RAT 6.01 tbb. how did you get the tensioner and c-clip on??? I just snapped the tensioner and had to reorder another set (hop up, sleeve, and tensioner) from ebairsoft. The sleeve seems to cover up the rest of the space that's shaved onto the barrel for the tensioner and clip.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users