Posted 02 January 2013 - 12:12 PM
BUT... I'm not sure what to do. I found barrels with a tighter bore, but they are the same length. I don't really want to go through the trouble of disassembling the MP7 to put in a barrel that isn't going to make a substantial difference. I'm not looking forward to trying to put the trigger back in... Monkeying with the AEG trigger spring gave me enough trouble. I can't find the Falcon 363mm barrel anywhere except ehobby and it's always out of stock there.
Then there is the 6mm Solutions/AG "power-up" supressor. I feel like I should just buy it and see for myself, but I hear with the FPS increase comes an accuracy decrease with the break in the barrels and the concept does sound stupid. But some people say it works great? And then there are the people on the forum here who's MP7's it as broken...
So, what are my options? If I have any...
Posted 02 January 2013 - 12:40 PM
Posted 02 January 2013 - 01:06 PM
**** it. I'll be the "official" test dummy. I have a few ideas on how to fix this supressor thing to work without any damage. It's worth it lol.
Edited by kwaispro727, 02 January 2013 - 07:28 PM.
Posted 05 January 2013 - 11:34 AM
It is still not cut quite right though. The notch on the side of the barrel that basically keeps the barrel in the gun is slightly different in the M4 cut. What this means for the gun is that the bucking is being pushed up tight against the outer barrel when I assemble it. The M4 barrel doesn't fit quite right. However, everything has been working fine so far and it appears to be holding up fine with no problems.
Posted 05 January 2013 - 10:20 PM
Posted 05 January 2013 - 10:57 PM
Posted 06 January 2013 - 11:42 AM
Posted 07 January 2013 - 04:13 PM
Posted 07 January 2013 - 04:33 PM
Posted 07 January 2013 - 06:29 PM
Posted 07 January 2013 - 08:38 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users