Official KWA G36c Photo Gallery
Posted 22 March 2011 - 08:18 PM
Nothing much has changed, but now there is a 425mm SR10 barrel in it with a 55mm barrel extension and a Gemtech Blackside. And of course my brand new Pantac RRV set up in the background.
Unfortunately it's down as the tappet plate broke and KWA hasn't gotten back to me about a new one yet =\
Posted 28 March 2011 - 10:10 PM
There is my little runnin' gun... the scope makes it a lot easier to spot Charlie... that and the top iron sites make it easy to target with a full mask on...
Up close of the bling on this gun... yes, I did a leaf job on the inlay... you know you want to now...
Posted 06 April 2011 - 10:40 PM
490-500 FPS (PDI 260%)
NC STAR Panorama Reflex
Madbull Noveske KX3 OD
Magpul RVG MOE Foliage Green
Edited by Hitman07, 06 April 2011 - 10:46 PM.
Posted 07 April 2011 - 05:18 AM
But if it's what you like, and it works for you, then stick with it. But the gun itself is still sexy.. can't bash the 36 in any way at all
Posted 07 April 2011 - 10:46 PM
Posted 08 April 2011 - 07:01 AM
Posted 07 July 2011 - 12:54 AM
I popped on some upgrades, a 30mm tight bore, an SP 120 spring, now shooting 430-450 FPS at 18 rps.
Put on a scope for DMR, with a tac rail system, which I mounted a red dot sight on top of for CQB.
Got three high cap stick mags at 360 ammo a piece and a 3k (ASB says 5k, net says 3, I could care less, it holds a sh*t load of ammo) round drum.
and an AK Vert Grip that folds.
The issue I come across is the limited rail space.
I want to get rid of the vert grip and add on an AGX Launcher (this: http://www.madbullai...products_id=212 )
The reason behind it is I have just about every infantry role covered (CQB, DMR, LMG) EXCEPT Anti-Armor, where the M203 launcher comes in handy, and the plus side is that the AGX Launcher still acts as a fore grip.
So the question I have is, what rail system (as I suppose there are other types aside from RIS) does the KWA G36C use and what rail system would be compatible for extending the bottom rail? As well as where can I find said bottom rail?
Posted 07 July 2011 - 11:01 PM
All stock internals (for now)
pretty basic, walther (nock-off) green dot
used a foregrip off of one of my real steel guns (remington 870 gone tacti-cool)
single point sling
The barrel extention is off of a friends scar's I am debating adding a K series handguard or even an MG36 length one. Until I figure out where I wanto go with it I'll just be picking up some mid caps for it for now.
Posted 31 August 2011 - 09:50 PM
Posted 21 April 2012 - 09:54 PM
Posted 10 June 2012 - 02:45 PM
This is the most recent photo of her. Broke my body. but got a new one locally.
Could look better, but meh. lol
*I'm having a hell of time keeping the images re-sized. Seems every time I re-post this it makes them bigger again. Sorry guys
Edited by Tork, 10 June 2012 - 02:52 PM.
Posted 25 November 2012 - 07:58 AM
New KWA bucking.
Guarder 363mm 6.03mm TBB
Classic Army G36k foregrip
Classic Army HK51 outer barrel. added foam padding inside the barrel to stablized the inner barrel as well.
Private Part M4 mag well conversion.
Is there any other barrel that works beside the CA HK51?
Edited by muffinman1604, 25 November 2012 - 07:59 AM.
Posted 14 March 2013 - 07:23 PM
Edited by jdl, 14 March 2013 - 07:23 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users