Posted 01 September 2013 - 03:43 PM
Posted 01 September 2013 - 04:31 PM
Beach is the only one to try with a WE. (Unless Akira is lurking and waiting to unleash something on us)
Posted 01 September 2013 - 05:25 PM
As for the WE build, nah I'm done experimenting and what not, just keeping my gun running smooth and playing is all I care about now days.
Posted 01 September 2013 - 06:56 PM
If you are having problems with stock fitting, you could try using a G&P GBB buffer tube. Some modification is required but it will work (the threads need to be sanded down IIRC).
Totally zoned on this Beach sorry.
Yes there was a gap with the gas block and the barrel. I used non-compressible shimming tape to deal with the gap.
As for the VFC stock. It won't fit because the made the rail on the buffer tube narrower. The stock is molded to that width. I assume they did that so the Real Steel guys can't stick HK branded buttstocks on their guns.
I want to keep the KWA buffer tube as it is about the same dimensions as real steel mil-spec buffer tube and gives me the option of running real steel stocks.
Posted 02 September 2013 - 10:45 AM
Posted 02 September 2013 - 08:24 PM
Posted 03 September 2013 - 10:57 AM
Posted 06 September 2013 - 09:48 PM
Posted 07 September 2013 - 12:14 PM
Lucked out and one showed on the local CL. The guy didn't even know what it was.
He just listed it as a "Airsoft Assault rifel". Pretty funny.
Good luck with your build.
Posted 07 September 2013 - 03:23 PM
Posted 07 September 2013 - 05:57 PM
Posted 22 February 2014 - 06:32 PM
Posted 24 February 2014 - 06:18 AM
Posted 24 February 2014 - 08:45 AM
Posted 24 February 2014 - 10:26 AM
Posted 24 February 2014 - 11:04 AM
Posted 05 March 2014 - 01:21 PM
Posted 05 March 2014 - 07:41 PM
Posted 14 April 2014 - 12:18 AM
The 3D print prototype top rail has come in:
I need to make a couple tweaks. It sits about 0.5mm too far back and 0.5mm too high.I know what's preventing it from sliding all the way forward, but I still need to figure out the vertical issue.
Lastly, I've been considering a "Mod 2" which would have a completely custom one piece upper. I'm trying to decide if I should make it an exact clone of the RS or do my own style that's compatible with all the 416 components. In case there's an opportunity to get a small run of them made, what would people prefer?
Edited by BeachEMT, 14 April 2014 - 12:21 AM.
Also tagged with one or more of these keywords: LM416, HK416
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users